MU-TAOX12 Honeywell Analog Output Terminal Assembly Module DCS Parts

Product Details:

Description:

The Honeywell MU-T Series Terminal Assemblies are power adapters, transmitter interfaces, input, output, and other types of terminal assemblies designed to work together for process management. The various assemblies include options for screw and compression terminals, CE compliance, and conformal coating. The MU-TAOX12 Honeywell Analog Output Terminal Assembly will still be available for purchase and support from Artisan Technology Group beyond End-Of-Life (EOL) by the manufacturer.

This module converts digital signals from a control system into analog voltage or current signals that can be used to control various industrial equipment. Some sources mention it has redundant outputs, providing a backup in case one channel fails. This enhances system reliability. There might be two versions available, one with 8 outputs and another with 16 outputs. Now initiate power-up tests on tower #1 by setting the POWER switch to ON. The red LEDs on the boards light for a few seconds (it takes less than 30 seconds to complete the power-up tests), then they turn off and the green LEDs turn on. If any red LEDs on the boards remain on, some portion of the power-up tests have failed—record the alphanumeric status display code and proceed to Service, Section 6 in this manual.

The MU-TAOX12 is classified as an Analog Output Module, specifically designed for transmitting analog signals to control elements in process automation. This manual provides information necessary to properly plan the installation of a High-Performance Process Manager (HPM) subsystem at a TPS system site. The subsystem encompasses the High-Performance Process Manager and the Network Interface Module (NIM), which is resident on the Universal Control Network (UCN), a network associated with the TPS system Local Control Network (LCN). The amount of information that this publication provides depends on your personal experience and the process that the High-Performance Process Manager will control and monitor. Any mix of the above I/O processors can be selected for a PM/APM/HPM controller. This can be any combination of single and/or redundant (HLAI, STI, AO, DI and DO) pairs, up to a total of 40. Even with the maximum complement of 80 physical IOPs, there is no impact on control or communication performance. In a redundant IOP configuration, control automatically transfers to the backup I/O processor during board replacement or failure.

The Honeywell MU-TAOX12 is a sophisticated Analog Output Module designed for integration within Honeywell's Experion Process Knowledge System (PKS). This module plays a vital role in controlling and managing various industrial processes by providing precise analog output signals to a range of field devices. This module typically features 12 output channels, allowing users to send signals to multiple actuators, valves, and other control devices simultaneously, which greatly enhances operational efficiency. It supports a variety of output signal types, including standard 4-20 mA and 0-10 V signals, ensuring compatibility with a wide range of field devices commonly used in industrial environments. The module enables real-time adjustments to process controls based on current data, allowing operators to respond quickly to changing conditions and enhancing overall system responsiveness.

Hot Selling:

Joyoung International Trading Co.,Ltd is not only the world's leading industrial equipment supplier, but also has been committed to the production of automation control system modules and spare parts for ten years.

We are located in Xiamen, a famous tourist city in China.

We are the world's leading industrial equipment supplier, specializing in the production of automation control system modules and spare parts for several years. We purchase from factories of world famous brands, such as konnad (general agent in China), Bently Nevada, abb, Invensys Triconex, GE Fanuc, Foxboro, Emerson, Epro, Schneider Modicon, Westinghouse, Siemens, Woodward, hima, Yaskawa, Bosch Rexroth, Rosemount, etc.

All of kinds of DCS、PLC parts as below:

ABB:

AC800M series module,Industrial robots spare parts DSQC series ,Bailey INFI 90,800xA,Advant OCS with Master Software,with MOD 300 software Advant OCS,Freelance - Distributed Control System for Process Industry,Symphony Melody,Satt OCS,Symphony DCI System Six,Harmony/INFI 90,Security system

Rockwell Allen-Bradley:

SLC500: 1747/1746 series

MicroLogix: 1761/1763/1762/1766/1764 series

CompactLogix: 1769/1768 series

Logix5000: 1756/1789/1794/1760/1788 series

PLC-5: 1771/1785 series

Bently Nevada:

3500/3300 Surveillance protection syste,Proximitor eddy current sensor probe

EPRO:

PR6422/PR6423/PR6424/PR6426 eddy-current transducer,PR9268 series Electro dynamic absolute vibration sensor MMS6000 system

VIBRO-METER:

Vibrating sensor,Acceleration sensor ,Eddy-current transducer,Monitor system module,Gateway communication module

Schneider Modicon:

Quantum 140 series:CPU processor module,Communication module,Analog input output module,Digital input output module

GE:

IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module ,Communication module ,Analog digital module

EX2100,EX2000Excitation system card ,IS200 series DS200 series

Invensys Triconex:

Redundant fault-tolerant control system,the most modern fault-tolerant controller based on triple-module redundancy (TMR) architecture

Westinghouse:

OVATION system,WDPF system,WEStation system

Honeywell:

Alcont,Experion LS,Experion PKS,Experion HS,Plant Scape

TDC 2000,TDC3000,TPS,security system

Emerson:

DeltaV system Dual - channel redundant security system Redundant controller

Power supply module I/O unit Analog AI modules Analog AO module

Siemens:

Siemens MOORE, 6ES5 series,6GK series,6DD series,6AR series

Yokogawa:

CS3000 system CPU control module,Analog module

Yaskawa:

Robots spare parts,Servo controller, Servo motor, Servo drive

Motorola (MVM):

MVME 162, MVME 167, MVME 1772, MVME 177 and other series

XYCOM:

I / O VME boards and processors.

Bosch Rexroth:

Indramat, I / O modules, PLC controllers, Drive modules, and so on.

Rosemount:

Pressure Transmitter, Flow meter

KONRAD:

EC6423/EC6424/EC6426/EC6430/EC6432/EC6433 series eddy-current transducer

EC20382 displacement sensor,MMS7000 Surveillance protection system

ENTEK:

Eddy-current transducer probe，Vibration monitoring table double channel axis vibration monitoring table C6652

Invensys Foxboro:

I/A Series system,FBM(input / output modules) sequential control,Ladder logic control, Accident recall processing,Digital-to-analog conversion,Input / output signal processing,Data communication and processing

Woodward:

SPC valve position controller 505/505E(9907-162,9907-164,9907-165,9907-167)digital controller

2301A controller 9905 series 2301D-ST series