IS200TBAIH1C GE Analog Input Terminal Board Gas Turbine Control System

Description:

The IS200TBAIH1C is an Analog Input Terminal Board manufactured and designed by General Electric as part of the Mark VI Series used in gas turbine control systems.

Two outputs and 10 analog inputs are supported by the Analog Input terminal board. Two-wire, three-wire, four-wire, or transmitters that are powered externally can all be plugged into one of the ten analog inputs. A current of 0-20 mA or 0-200 mA can be configured for the analog outputs. Surge and high frequency noise are protected from by noise suppression circuitry in the inputs and outputs.

The IS200TBAIH1C PLC module is a high-quality programmable logic controller designed for industrial applications. It provides the best performance and advanced functions to meet the needs of automation and control systems.

The I/O controller queries each cable connector's unique ID device on the terminal board. The ID device is a read-only chip that has the JR, JS, and JT connector locations, along with the serial number, board type, and revision number of the terminal board. A hardware incompatibility fault is produced when this chip is read by the I/O controller and a mismatch is discovered.

Additional Information:

Product Details:

Joyoung International Trading Co.,Ltd is not only the world's leading industrial equipment supplier, but also has been committed to the production of automation control system modules and spare parts for ten years.

We are located in Xiamen, a famous tourist city in China.

We are the world's leading industrial equipment supplier, specializing in the production of automation control system modules and spare parts for several years. We purchase from factories of world famous brands, such as konnad (general agent in China), Bently Nevada, abb, Invensys Triconex, GE Fanuc, Foxboro, Emerson, Epro, Schneider Modicon, Westinghouse, Siemens, Woodward, hima, Yaskawa, Bosch Rexroth, Rosemount, etc.

All of kinds of DCS、PLC parts as below:

ABB:

AC800M series module,Industrial robots spare parts DSQC series ,Bailey INFI 90,800xA,Advant OCS with Master Software,with MOD 300 software Advant OCS,Freelance - Distributed Control System for Process Industry,Symphony Melody,Satt OCS,Symphony DCI System Six,Harmony/INFI 90,Security system

Rockwell Allen-Bradley:

SLC500: 1747/1746 series

MicroLogix: 1761/1763/1762/1766/1764 series

CompactLogix: 1769/1768 series

Logix5000: 1756/1789/1794/1760/1788 series

PLC-5: 1771/1785 series

Bently Nevada:

3500/3300 Surveillance protection syste,Proximitor eddy current sensor probe

EPRO:

PR6422/PR6423/PR6424/PR6426 eddy-current transducer,PR9268 series Electro dynamic absolute vibration sensor MMS6000 system

VIBRO-METER:

Vibrating sensor,Acceleration sensor ,Eddy-current transducer,Monitor system module,Gateway communication module

Schneider Modicon:

Quantum 140 series:CPU processor module,Communication module,Analog input output module,Digital input output module

GE:

IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module ,Communication module ,Analog digital module

EX2100,EX2000Excitation system card ,IS200 series DS200 series

Invensys Triconex:

Redundant fault-tolerant control system,the most modern fault-tolerant controller based on triple-module redundancy (TMR) architecture

Westinghouse:

OVATION system,WDPF system,WEStation system

Honeywell:

Alcont,Experion LS,Experion PKS,Experion HS,Plant Scape

TDC 2000,TDC3000,TPS,security system

Emerson:

DeltaV system Dual - channel redundant security system Redundant controller

Power supply module I/O unit Analog AI modules Analog AO module

Siemens:

Siemens MOORE, 6ES5 series,6GK series,6DD series,6AR series

Yokogawa:

CS3000 system CPU control module,Analog module

Yaskawa:

Robots spare parts,Servo controller, Servo motor, Servo drive

Motorola (MVM):

MVME 162, MVME 167, MVME 1772, MVME 177 and other series

XYCOM:

I / O VME boards and processors.

Bosch Rexroth:

Indramat, I / O modules, PLC controllers, Drive modules, and so on.

Rosemount:

Pressure Transmitter, Flow meter

KONRAD:

EC6423/EC6424/EC6426/EC6430/EC6432/EC6433 series eddy-current transducer

EC20382 displacement sensor,MMS7000 Surveillance protection system

ENTEK:

Eddy-current transducer probe，Vibration monitoring table double channel axis vibration monitoring table C6652

Invensys Foxboro:

I/A Series system,FBM(input / output modules) sequential control,Ladder logic control, Accident recall processing,Digital-to-analog conversion,Input / output signal processing,Data communication and processing

Woodward:

SPC valve position controller 505/505E(9907-162,9907-164,9907-165,9907-167)digital controller

2301A controller 9905 series 2301D-ST series